AlgoLaser Smart Enclosure for All Laser Engraving Machines

Note:

The included smart hub is a necessary tool for using the smart enclosure and smart air pump at the same time.For most DIY KIT 5W/10W users that haven't use smart air pump can choose the enclosure only.

The specifications for the smoke exhaust pipe:

The pipe is with inner diameter of 75mm, outer diameter of 81mm and tension length from 0.1m to 1m. If you require a longer pipe, we suggest purchasing a new pipe with the inner diameter of 75mm.

What is the purpose of the metal wire mesh on the left side? Will smoke escape from the metal wire mesh?

The wire mesh on the left side serves as the air inlet. When the fan is turned on, it creates a directional airflow from left to right, resulting in a more effective smoke exhaust.
Therefore, when using the Smart Enclosure, be sure to turn on the fan to avoid smoke leakage.

How do I use the enclosure and what is the correct sequence?

Please follow the instructions in the Smart Enclosure manual to complete the operation.
Method 1: First place the enclosure on the workbench, then put in the engraver and finally connect the cables.
Method 2: First place the engraver on the workbench, then place the enclosure from the top, cover the laser and finally connect the cables.

There is a 1cm gap between the cover and the enclosure. But please rest assured that the smoke will be quickly removed, so there won’t be any smoke leakage.